Use references: 1. The applicable voltage for this appliance is AC 220-240V. Please check thatthe voltage on the product rating plate coincides with your mains voltage. 2.Do not use the appliance under any circumstances in areas with explosive orcaustic gases. 3.Do not rap the appliance since the current is switched on, lest operational life3span shorten caused by short the heating wires. 4.Normal electronics grade solder is usually rosins or tin solder paste. Especiallywhen the power is under 100W, tin solder stick will be the first choice.Hydrochloric acid is not appropriate to use as solder. Heat evaporates acidfluxes, might cause some internal components corroded, and lead to thedamage of the appliance. 5.If the copper board be notoriously difficult to solder, use a small hand-held fileor perhaps scrape a knife blade over them to reveal fresh metal underneath. 6.Took off the Copper tip and remove the layer of oxidation. Do this immediately,with new tips being used for the first three times, in order to avoid tips couldnot be lifted down after use for a long time. 7.Do not use the appliance under wet or wet operations. Keep from moisture toprevent short circuit. 8.This appliance fit grounded receptacle ONLY This appliance is not intended for use by persons (including children) 9.reduced physical,sensory or mental capabilities, or lack of experienceknowledge, unless they have been given supervision or instruction concerninguse of the appli ance by a person responsible for their safety.
Warning: Never set your appliance down on anything other than an iron stand whetherbe in use or not. lf the supply cord is damaged,it must be replaced by the manufacturer orservice agent or a similarly qualified person in order to avoid a hazard.Children should be supervised to ensure that they do not play with theappliance. Warranty Information: The manufacturer provides warranty in accordance with the legislation of thecustomer's own country of residence, with a minimum of 1 year (Germany: 2 years),starting from the date on which the appliance is sold to the end user.The warranty only covers defects in material or workmanship.The repairs under warranty may only be carried out by an authorized service centre.When making a claim under the warranty, the original bill of purchase (withdate) must be submitted. The warranty will not apply in cases of:. Normal wear and tear - Incorrect use, e.g. overloading of the appliance, use of non-approved accessories- Use of force, damage caused by external influences- Damage caused by non-observance of the user manual, e.g. connection tounsuitable mains supply or non-compliance with the installation instructions- Partially or completely dismantled appliances
Correct Disposal of this product: This marking indicates that this product should not be disposed with other household wastesthroughout the EU. To prevent possible harm to the environment or human health from uncontrolledwaste disposal, recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the return and collection systems or contact the retailerwhere the product was purchased. They can take this product for environmenta safe recycling.
Company Information
Ningbo Kimpin Industrial Pte Ltd. is specialized in designing&manufacturing a wide range of industrial gas welding/cutting equipment,gauges,regulators, cutting/welding torches,safety apparatus,related accessories and medical therapy and suction devices.
As a professional supplier of welding equipments, we have built up our own experience in machining, quality control and testing in the past 20 years. The parts of our products are machined by CNC. Every product is 100% inspected and tested strictly before delivery.
Our brand"RICHU"is a famous brand in China. Our company has passed ISO9001 Certification. The products are UL listed and CE marked,the safety gas valves and gas shut-off valves are CSA listed. The design and construction have been treated to meet the full requirement of EN ISO standard, such as EN ISO 2503,EN ISO5172, EN730-1,EN ISO 562 and EN ISO 837-1…etc.
With sincere earnestness and honesty, we are sure that we will impress our customers with our good quality and excellent services. We are looking forward to establishing long term business relationships with worldwide customers.
FAQ
1. Q: Are you manufacturer or trader?
A: We are the most professional manufacturer in China for gas equipment. We have one factory producing gauges and regulators, and another factory producing cutting, welding torches and nozzles.
2.Q : Do you have UL to USA ?
A: Yes, we have UL certificate for gauges,regulators and torches.
3.Q: Do you have CE?
A: yes we have CE for gauges and some regulators.
4. Q: what is your quality control system?
A:Our factory had passed ISO 9001. And we are using ERP management system for 3 years already. 100% product is tested as the standard testing procedure before leaving our factory.
5. Q: What’s the delivery time?
A: Usually it takes 30-35 working days after customer confirms the order.
6. Q: What'S your warranty terms ?
We offer 1 year warranty for materials for all our products For quality problem.